The SMALLRIG Universal Phone Holder Mount review is for creators who need a simple way to attach a phone to a camera or tripod and switch between portrait and landscape framing.
Its broad phone-width range, two adjustable joints, and accessory mounting points make it a flexible option for filming, streaming, or interviews.
SMALLRIG Phone Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for accessories.
- Fits smartphones 57–88 mm wide.
- Rotates between landscape and portrait modes and locks when turned 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
- Base includes a 1/4-inch-20 threaded hole and a cold shoe for mounting.
Pros
- Wide phone-width range accommodates many smartphone sizes.
- Portrait and landscape rotation makes it adaptable to different shooting formats.
Consider before buying
- The 500 g maximum requires checking the combined weight of the phone and attached accessories.
- Phone fit is based on width, so measure a bulky case or grip if it changes the phone’s overall width.
Read the full review summary
This phone clamp combines two mounting approaches at its base: a 1/4-inch-20 threaded hole and a cold shoe connection.
It also has a cold shoe on top for a microphone or light, while multiple threaded holes support compatible accessory setups.
The design is useful when you want a phone in the same general rig as a camera or other equipment.
The holder accommodates phones 57–88 mm wide and rotates between landscape and portrait, with a lock at the 90-degree turn. Two rotary joints provide up to 180 degrees of adjustment.
It suits mobile creators who value framing flexibility and modular mounting; buyers should check their phone’s width and keep the complete setup within the 500 g load capacity.
The buying factors
SMALLRIG Phone Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Phone compatibility
The 57–88 mm width range covers a broad variety of smartphones, though fit depends on the phone’s actual width.
Mounting flexibility
A 1/4-inch-20 threaded hole and cold shoe at the bottom offer two ways to attach the holder to compatible equipment.
Framing adjustment
Portrait and landscape rotation plus two rotary joints provide useful options for positioning the phone.
Accessory expansion
The top cold shoe and multiple threaded holes can support a more tailored mobile filming setup.
Load capacity
The 500 g maximum gives a clear limit, so buyers need to account for the phone and any attached accessories.
Portability
At 73 g, the holder adds relatively little weight to a camera or tripod kit.
Key Features and Specifications of SMALLRIG Phone Mount
- Fits smartphones 57–88 mm wide.
- Rotates between landscape and portrait modes and locks when turned 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
- Base includes a 1/4-inch-20 threaded hole and a cold shoe for mounting.
- Top cold shoe is intended for a microphone or light.
- Multiple threaded holes support compatible accessories, including specified power bank holders.
- Maximum load capacity is 500 g; holder weighs 73 g.
Pros and Cons of SMALLRIG Phone Mount
Pros
- Wide phone-width range accommodates many smartphone sizes.
- Portrait and landscape rotation makes it adaptable to different shooting formats.
- Two base connection options suit varied camera and tripod rigs.
- Top cold shoe and threaded holes provide room to expand a filming setup.
Consider before buying
- The 500 g maximum requires checking the combined weight of the phone and attached accessories.
- Phone fit is based on width, so measure a bulky case or grip if it changes the phone’s overall width.
- The package includes the phone holder only, so compatible cameras, tripods, lights, and microphones are separate parts of a setup.
Who Should Buy SMALLRIG Phone Mount?
Good fit
Consider this holder if you regularly record with a phone and want to mount it on a camera or tripod.
The choice of a threaded connection or cold shoe at the base can help it fit into different rigs, while the top shoe gives you a place to add a compatible microphone or light.
It is particularly relevant for creators who switch between vertical clips and horizontal video, or who want to reposition their phone using the two rotary joints.
Before choosing it, check that the phone’s width falls within 57–88 mm and that the full mounted load stays at or below 500 g.
Who should skip it
Look elsewhere if you need a holder for a phone outside the 57–88 mm width range, or if your planned phone-and-accessory combination exceeds the 500 g maximum.
If your setup depends on a specific mounting interface, confirm that it matches one of the holder’s base connections before buying.
It may also be more adaptable than you need if you only want a basic phone holder without the ability to rotate the frame or add rig accessories.
SMALLRIG Phone Mount: what its adjustable design means
Mounting it into a camera rig
The base’s 1/4-inch-20 threaded hole and cold shoe give buyers two ways to connect the holder, depending on the compatible equipment they already use.
This can make it easier to include a phone alongside a camera or tripod setup, but check the mounting point and available clearance on your rig before buying.
Changing orientation and angle
The holder supports landscape and portrait modes, locking after a 90-degree rotation, while its two rotary joints allow up to 180 degrees of adjustment.
That combination can help when a shot calls for a new orientation or a different phone position, without requiring a completely different holder.
Adding a microphone or light
A cold shoe on top is designed for a microphone or light, and multiple threaded holes provide further expansion points.
These interfaces make the holder relevant to more involved mobile filming, though the 500 g maximum means the weight of the phone and attached accessories should be considered together.
Checking phone fit and weight
The stated width range is 57–88 mm, so compare that with the phone’s width as used, including any case that changes its dimensions.
The holder itself weighs 73 g; for a heavier rig, check the combined load against the 500 g cap before mounting it.
Alternatives to SMALLRIG Phone Mount
Cell Phone Camera Mounts alternative

700+ ratings
Read Amazon ReviewsSMALLRIG Magnetic Metal Phone Mount with Cold Shoe Mount
Choose the Universal Phone Holder Mount if you want a width-adjustable clamp that can accommodate phones beyond the stated MagSafe iPhone compatibility.
The 5156 may fit better if you use a compatible MagSafe iPhone and value its detachable accessory plate; consider its impact-related detachment caution when deciding whether it suits your rig.
- The Magnetic Metal Phone Mount 5156 is designed for iPhones with MagSafe and offers portrait and landscape switching, two rotating shafts, multiple threaded holes, and a detachable top plate.
- Its stated maximum load is 500 g, and external impacts may cause the device to detach.
- The Universal Phone Holder Mount uses a clamp for phones 57–88 mm wide and has two base connection options, portrait and landscape rotation, two rotary joints, and a 500 g maximum load.
Is SMALLRIG Phone Mount Worth It?
The SMALLRIG Universal Phone Holder Mount is worth considering for mobile creators who want an adjustable phone position, easy switching between portrait and landscape, and mounting points for integrating accessories.
Its 57–88 mm phone range and two base interfaces make it adaptable to a range of compatible rigs.
Check phone width, mounting compatibility, and total load before buying.
The 500 g limit is the main constraint to plan around, especially if you intend to attach a microphone or light, but within that boundary the combination of rotation and expansion points makes this a capable phone holder for a modular filming setup.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSMALLRIG Universal Phone Holder Mount
A flexible camera or tripod phone clamp for creators who want portrait and landscape framing plus a cold shoe for accessories.
- Fits smartphones 57–88 mm wide.
- Rotates between landscape and portrait modes and locks when turned 90 degrees.
- Two rotary joints allow up to 180 degrees of adjustment.
- Base includes a 1/4-inch-20 threaded hole and a cold shoe for mounting.